Align T-Rex 700
It is usually being sold in two variants one of which doesn't include the engine.
Known issues
Some people have suggested that the ball link sockets can become brittle in cold weather.
Some people have had issues with the main gear stripping in normal use. This may be due to the gear mesh being slightly out; an aftermarket clutch block may help fix this. Align has reportedly quietly brought out a very slighly larger diameter gear, which may or may not be a better fit. The MicroHeli CNC delrin maingear replacement is reported to be no better than the standard Align one.
There are strong rumors that a gasser version of the 700 is under development.
Reviews and articles
CAUTION: This helicopter on large scale of big nitro helicopter OS Max 91 HZ-R Flying of the nothing 3D is 71%.
|
---|
Align T-Rex 700 |
Manufacturer | Align |
Class | 90 size nitro |
Build | Kit |
Blade size | 690 - 710mm |
Level | Intermediate to Advanced |
Frame | |
Material | Carbon fiber |
Type | Two piece |
Servo to swash linkage | Bell crank with push pull linkages |
Servo size | Standard |
Rotor head | |
Grips | Metal |
Head block | Metal |
Links | Ball |
Swash | Metal |
Control | CCPM 120° |
Tail | |
Drive system | Shaft |
Auto driven | Yes |
Tail pitch slider | Double |
Tail blade grips | Plastic |
Tail case | Metal |
Boom strut material | Carbon |
Gearing | |
Main rotor to pinion ratio | 1:8.2 |
Main rotor to tail ratio | 1:4.5 |
Weight | |
Empty weight | 5 lbs., 6 oz. (2437g) |
Weight without fuel | 9 lbs., 13 oz. (4451g) |
Fully loaded weight | 11 lbs., 0 oz. (4990g) |
Dimensions | |
Height | 17.75 in. (450mm) |
Canopy width | 5.5 in. (127mm) |
Landing gear | 8.125 in. (206mm) |
Paddle to paddle diameter | 27.75 in. (704mm) |
Main rotor diameter | 62.5 in. (1587mm) |
Tail rotor diameter | 11 in. (279mm) |
Length | 52.05 in. (1335mm) |
It is usually being sold in two variants one of which doesn't include the engine.
Known issues
Some people have suggested that the ball link sockets can become brittle in cold weather.
Some people have had issues with the main gear stripping in normal use. This may be due to the gear mesh being slightly out; an aftermarket clutch block may help fix this. Align has reportedly quietly brought out a very slighly larger diameter gear, which may or may not be a better fit. The MicroHeli CNC delrin maingear replacement is reported to be no better than the standard Align one.
There are strong rumors that a gasser version of the 700 is under development.
Reviews and articles
- RC Heli magazinescorecard (reviewed in the October 2008 issue):
- Instructions - 4.5
- Parts quality/Fit - 4.5
- Durability - 4.5
- Tunability - 5
- Overall performance - 4.5
- Value - 5
- Quick UK replacement ball link set;
- Aftermarket clutch block on TrexTuning.
- MicroHeli CNC maingear on Helifreak.
CAUTION: This helicopter on large scale of big nitro helicopter OS Max 91 HZ-R Flying of the nothing 3D is 71%.