This AV corrects an airfoil problem with the fuselage that results in a slight pull to the right.
I have also moved the Center of Gravity back. This results in a sink rate of about 3 ft/sec instead of 9 ft/sec with the unmodified model.
Finally I have added a ballast at the COG (called BallastCoG). You can add weight to that ballast and get better wind penetration if you want it. Be careful to add the weight to the correct ballast as there is a 2nd one that is in the original EA. I have tested this with weights up to 16 oz.
Thanks to Fly_electric for the nice model.
I have also moved the Center of Gravity back. This results in a sink rate of about 3 ft/sec instead of 9 ft/sec with the unmodified model.
Finally I have added a ballast at the COG (called BallastCoG). You can add weight to that ballast and get better wind penetration if you want it. Be careful to add the weight to the correct ballast as there is a 2nd one that is in the original EA. I have tested this with weights up to 16 oz.
Thanks to Fly_electric for the nice model.
