Interface

There are lots of problem occurs when interface acts between the connections. There are so many problem of it . It doesn't have any problem if code is right and connections should not be failure. This is the important thing that should be in your mind.
 
I would like to Through G2 USB InterLink Behind adapter Connection Come out With their own
Futaba Transmitter Run G2 Simulator ~
Do not know how to connect and set up?
 
Remember
Ducks flying west ,do not point their beaks east

Sprinkle fairy dust

Drop a coin in the well

Click your heels together 3 times and say :

"Use the cord that came with it"
"Use the cord that came with it"
"Use the cord that came with it"
 
Last edited:
G2 InterLink Back Interface Port Joined Attaches Interface Adapter Cable Another end connection Own Transmitter
In G2 Simulator Controller Type Select Interlink Controller (interface Mode)
Establishment Transmitter channel and Adjustment Joystick The reference tries
 
G2 InterLink Back Interface Port Joined Attaches Interface Adapter Cable Another end connection Own Transmitter
In G2 Simulator Controller Type Select Interlink Controller (interface Mode)
Establishment Transmitter channel and Adjustment Joystick The reference tries

When I read this I often wonder if Yoda typed this. I have no Idea what translator you are using but stop and try another one because the one you are using is not good.

Not good is your Translator I see... :)
 
Back
Top