Request Aircraft Here!

here's the status so far, i finised my tensor 4d, the showtime 4d is just about ready to get released, the yak 54 shocky is released, as well as the tensor, and some slope combat wings, i also made a parachutist that's rc. and a hang glider. pm me if you want any fo these models, right nwo we have the F5D pylon racer that will be finished tonight. and uploaded tomorrow. i am experimenting with heli's at the moment. the t rex se shoudl be the first fo my heli's. but the hangar 9 showtime 4d is coming out later this week. ryan
email e or pm me if you want any fo these models
next weekw ill be a funtana 90.
 
maxkop said:
Where can I download your planes?
uuuhhh, here

having a Blade Cx and Cp would be a nice model, a Cx seems to be a common one in some forums that is being used for begginers
 
Some night helis and planes would be real nice. I have a night time photofield to fly in but no aircraft with all the night goodies. Some night rotor blades for a heli would be sweet(550,600,710,830mm.). If not then a big gasser heli with one of those sweet camera rigs like the HeliCam Solutions Mark IV would be awsome. The one with the gear that lifts so that the camera can pan a full 360 degrees with nothing obstructing the view. Can anyone make these? Thank you. Heli-Holic.


http://www.helicamsolutions.com/

http://www.airfoilhelicam.com/thermal2.php
 
Last edited:
requests!

i would love to see a Hangar 9 Alpha .40, .60, or arrow.
Some U-Can-Do's
Sig 4 star!
and the blade heli.
 
How about...

How about now that the filter people have been clamouring for is finally out, that we see some USER CREATED planes and helis, instead of just requests???
 
Rock and a hard place

Thats not the issue at all opjose. I've got stuff finished and ready to go but dare not post untill I have "permission" from all the respective copyright owners, I believe nemos in the same boat. I've got emails out to different companies and have been waiting for a responce. Read the rules of posting that KE put up HERE

"You understand and acknowledge that you are responsible for whatever content you submit, and you, not Knife Edge Software, have full responsibility for such content, including its legality, reliability and appropriateness. By uploading or otherwise transmitting material to Knife Edge Software, any affiliate or any area of any Knife Edge Software web site, you warrant that the material is your own or is in the public domain or otherwise free of proprietary or other restrictions and that you have the right to communicate it to Knife Edge Software and its affiliates and/or post it to the Knife Edge Software web sites"
 
martinic said:
I would live to see a proper Trex 450 mini e-heli (we are using a dolphin model now - not very convincing).

I would also like a proper T-Rex 450 model.

Most of the T-Rex forums that I frequent recommend going with Reflex XTR for the best T-Rex models... but I'm not about to run out and buy XTR since I already have G3!
 
FlyGuy said:
Thats not the issue at all opjose. I've got stuff finished and ready to go but dare not post untill I have "permission" from all the respective copyright owners, I believe nemos in the same boat. I've got emails out to different companies and have been waiting for a responce. Read the rules of posting that KE put up HERE

That is the "proper" way of doing things.

However as Knifeedge did, there is no need to model an original aircraft exactly.

The Dominion is a great generic heli.

Some changes would be enough to avoid copyright issues... in your case... although I wasn't referring to your wonderful models.


There were a lot of people complaining about the lack of the import filter.

Now that it's out... the silence is deafening.

Other sims have boat loads of user created add-ons and only rarely does the logo/copyright issue come up.

There was a recent case with American Airlines and a web site hosting user created models for MS Flight Simulator. (AA finaly gave in and gave the site a "blanket" copyright permission so that they could say that they have protected their assets... nice move AA!!!)

But when this does come up, it bites hard... ugh.

In any event there is nothing to preclude people putting up things like old warbirds, military planes, their own model designs, variations on existing craft etc.

These forums should now be repleat with the first wave of user created models...but all we see are requests.

This was not directed to Nemo and Flyguy, rather I was hoping to get people to start utilizing the new capabilities (I know I'm trying) instead of just posting requests...
 
Thats an interesting perspective on doing things opjose, maybe I could accomplish things quicker if I were to make some "changes" ;)

On the subject of "permission" I finally got some good news from Hobbico and RCU and it looks like my RCU bipe will be available soon, I also heard back from the guys at MAE today and they have also given me permission to do one of their very exciting newer models -the "Jinx the Evil Twin" (dual brushless profile with Full-cord wing "Tiperons")
 
Huge Request, but why has no one made or even asked for nice twin engine bombers.
I really want a B-25J <--- Requesting this above all others!!!!!
pic here: http://www.parkflyer.at/uploads/mediapool/Bilder/artikel874_voll_1.jpg )
This is an FSK rc model.

Also, an ME-110c -- pics can be found here.... http://www.rcgroups.com/links/index.php?id=4703
Can also be found here: http://www.hobby-lobby.com/bf110c.htm

Why are there no WWII German planes in G3? Like an ME-109, ME 262, etc.
Why are there no Japanese planes in G3? AM6 Zero, Kate, etc ??

For helis, Cobra Gunship, Apache, Comanche

For more interesting stuff:
Battlestar galactic original Viper fighter.....use 3 turbines for the motors
http://www.scifi.com/battlestar/classic/

A cylon raider
Could use ducted fans as the power
http://www.scifi.com/battlestar/classic/
 
Just relax Kahloq:) It is very difficult to get an airplane in G3 without using 3dsmax. My A5M Claude is now finished and have finallly got permission from the original designer. I only have to go through the physical properties, and make the plane "flyable" :) Release is today or tomorrow.
 

Attachments

  • 3.JPG
    3.JPG
    25.6 KB · Views: 53
  • 4.JPG
    4.JPG
    22 KB · Views: 115
Back
Top