Request RF6 Aircraft Here

aircraft to be built

Hi, I am really new to the knife edge community and the rc community altogether. I have been looking for a few aircraft that I can not find the two main ones being an EA-6B Prowler as well as an F-35 with VTOL. Let me know if you need any information about these or if you know of someplace to get one that has been made already.
 
I have some pictures and info if needed of a Boeing KC-135 (707) with 3-views. There are also some varients of the Boeing 707 I also have pics and info for. The Rivet Joint Reconaissance plane and the E-3A Sentry AWACS planes. I will provide as much research and pics as needed to help.
 

Attachments

  • large_kc-135_3d_model_00064e72-5048-42e1-b7c0-ebc7cb3a3bf4.jpg
    large_kc-135_3d_model_00064e72-5048-42e1-b7c0-ebc7cb3a3bf4.jpg
    28 KB · Views: 16
  • 060613-F-4192W-120.jpg
    060613-F-4192W-120.jpg
    488.3 KB · Views: 16
  • 64-14848-USAF-United-States-Air-Force-_PlanespottersNet_312210.jpg
    64-14848-USAF-United-States-Air-Force-_PlanespottersNet_312210.jpg
    35.5 KB · Views: 10
  • rc-135-rivet-joint-ryan-wyckoff.jpg
    rc-135-rivet-joint-ryan-wyckoff.jpg
    68.6 KB · Views: 8
  • b091210a.jpg
    b091210a.jpg
    264.4 KB · Views: 10
More pics for Boeing 707
 

Attachments

  • 01972-mid.jpg
    01972-mid.jpg
    10.6 KB · Views: 7
  • 07145-mid.jpg
    07145-mid.jpg
    11.4 KB · Views: 10
  • refueling_a-10s.jpg
    refueling_a-10s.jpg
    487.5 KB · Views: 12
Hi, I am really new to the knife edge community and the rc community altogether. I have been looking for a few aircraft that I can not find the two main ones being an EA-6B Prowler as well as an F-35 with VTOL. Let me know if you need any information about these or if you know of someplace to get one that has been made already.

Both of these models are available on the Swap pages...

Search for Grumman A-6 Intruder and F-35B STOVL Here
 
Last edited:
REQ: Mirage 2000

I have been looking for months trying to find a Mirage 2000 but i could not find one.
I would like it to be on a 1/7 or even smaller if you dont want to make it that big.


Crew: 1
Length: 14.36 m (47 ft 1 in)
Wingspan: 9.13 m (29 ft)
Height: 5.20 m (17 ft)
Wing area: 41 m² (441.3 ft²)
Empty weight: 7,500 kg (16,350 lb)
Loaded weight: 13,800 kg (30,420 lb)
Max. takeoff weight: 17,000 kg (37,500 lb)
Powerplant: 1 × SNECMA M53-P2 afterburning turbofan Dry thrust: 64.3 kN (14,500 lbf)
Thrust with afterburner: 95.1 kN (21,400 lbf)

Here are some pics :
http://2.bp.blogspot.com/-wdEvuSvBww0/TxibbzG-SyI/AAAAAAAAAaU/i1yCOb-CNgU/s1600/pease-2011_59.jpg
http://decals.kitreview.com/decals/images/Mirage2000_Syh@rt_48-011-00.jpg

If you wouldn´t mind i would love it in the second picture its color sceme

GRTZ,

Joey
 
No one ever checks the swap pages... sheez.


porter%20right%20front_8gd.jpg
 
Hello all.

I'm fairly new to the RC hobby, and practically brand new to RF so please forgive me if I miss anything I'm supposed to include when making a model request. I know there's a CTSW on the pages, but I've always thought the Flight Design CTLS is a beautiful plane and hope someone else thinks so as well and will be inclined to make a version of the Freewing model.

Please let me know if there's anything else I need to include here and I'll look around and see if I can find it.

Thanks!

Airplane Specs-

Wing Span: 28 Feet, 2 Inches
Length: 21 Feet, 8 Inches
Height: 7 Feet, 8 Inches
Cabin Width: 49
Aspect Ratio: 7.29:1
Empty Weight: 790/ 810Pounds
Gross Weight: 1,320 Pounds
Fuel Capacity: 34/35 Gallons
Fuel Economy: 5.5/4.3 Gallons/Hour
Powerplant: Rotax 912S or 912iS (100HP) 2000 TBO
Speed: 120 KTS
Economy Range: @4300RPM 830 NM /1055 NM

A 3 View of the plane:
ctls-lsa-inch-2.jpg


Model Specs-

Wingspan: 1200mm/47.25in
Length: 900mm/35.4in
Flying Weight: 1100g
Power System: Brushless 3510-1000Kv
Speed Control: 30A, Internal BEC, T connector
Propeller / EDF: 9x8 3 blade prop
Servos: 9g×5
Landing Gear: Fixed
Required Battery: 11.1V 1800mAh 25C 3 cell LiPo
Required Radio: 4 Channel
Rudder: Yes
Flaps: Optional -molded servo area and flap cut outs
Ailerons: Yes
Lights: No
Hinge Type: Nylon hinges on all control surfaces
Material: EPO Foam

And a few pictures of the Model. I couldn't find any "3 view" images unfortunately.
_MG_0504__71881.1410998814.1020.1020.jpg

freewing-4-ch-flight-design-3640pic1.jpg

img-4034-jpg_1375816008.jpg
 
I've always thought so! I love how there's hardly a straight edge anywhere on it. I'd be stoked if someone would take the time to create it, but with nearly 80 pages of requests in RF6 alone I'm sure it'll be a while.
 
I've always thought so! I love how there's hardly a straight edge anywhere on it. I'd be stoked if someone would take the time to create it, but with nearly 80 pages of requests in RF6 alone I'm sure it'll be a while.

There are only 5 or so airplane creators here lately that are still active. I don't think any are creating for RF 6.5 though as the new exporter only supports RF7 and up. Post a request for a model in the RF7 designer forum and it may peek someone's interest.
 
There are only 5 or so airplane creators here lately that are still active. I don't think any are creating for RF 6.5 though as the new exporter only supports RF7 and up. Post a request for a model in the RF7 designer forum and it may peek someone's interest.

Thanks for the tip!

I'll give it a shot. I've found some models made for later editions work with earlier versions. This one should translate since it's a simple 4 or 5 channel model no?
 
Thanks for the tip!

I'll give it a shot. I've found some models made for later editions work with earlier versions. This one should translate since it's a simple 4 or 5 channel model no?

It's not that it's the latest exporter allows a larger amount of polys to be used to create the models. The older versions of realflight won't work with these models. The creator would have to work with a lower limit on the models as well as change the plug-in in 3dsmax.
 
F105D Thunderchief Request

I would like to suggest a giant scale F105D thunderchief or one of its many variants.
 

Attachments

  • 3ViewSec-Republic-F105.jpg
    3ViewSec-Republic-F105.jpg
    56.2 KB · Views: 2
  • 071016-F-1234S-019.jpg
    071016-F-1234S-019.jpg
    302.7 KB · Views: 2
  • 1782721.jpg
    1782721.jpg
    495 KB · Views: 2
X-UAV mini talon model

Hello

I would like to congratulate for the wast number of models I saw in this forum.

I was wondering if someone will be so kind to make a model of X-UAV mini talon

58044(1).jpg
 
Hello

I would like to congratulate for the wast number of models I saw in this forum.

I was wondering if someone will be so kind to make a model of X-UAV mini talon

58044(1).jpg

See the above posts. The same still applies but with less modelers now. Nobody creates for Realflight 6.5 anymore.
 
See the above posts. The same still applies but with less modelers now. Nobody creates for Realflight 6.5 anymore.

There's still one modeler that supports RF 6.5. Fly_electric released his Quad Fan Delta for RF 6.5 and I think he's on track to release his newest model for RF 6.5 (Sig Morrisey Bravo). But he has limited time for modeling so he stays pretty busy.
 
UMX Gee Bee R2 with AS3X Technology

Roger That Jeff!,

I will do what you suggest,...I had completely forgotten about the new Physics Editor by Percentages.

Thanks for Helping once again!,

Anyway,....Its about time I learn how to do some of these items in an "Open Source"
piece of Simulation Software that I have been using since its inception.

Michael,..
Did you Ever make your model, if so would you be willing to post it? just bought a GeeBee, and was surprised it was not in RF
 
Back
Top