djohns1290
New member
Hi guys, joined your forum in hope to seek support to get up and running on the sim,
I purchsed 9.5s software only and installed via steam used product key from the box
installed and opened and using the Spektrum W52000 + NX8 I can get the program started and fly (without setup) anything fixed wing
and the application automaticaly closes down after i send error report to knife edge software.
It gets better.. steam prompted me to download RF EVOLUTION so i done so and that is just a screen with the (i thinks its a Habu EDF)
once thats opened i cant do anything with menus or pressing esc dont overlay any menu nor does putting the curser to the right of the screen (although i do get the gong when i move the mouse to the LH side of the screen below is EVOLITION
so to recap
Spektrum NX8
Spektrum W52000
RF9.5s + EVO downloaded via steam and initiated with the serial key from the box from the model shop
my laptop is a new samsung book 2 pro 360 spec
Processor 12th Gen Intel(R) Core(TM) i7-1260P 2.10 GHz
Installed RAM 16.0 GB (15.6 GB usable)
System type 64-bit operating system, x64-based processor
Edition Windows 11 Home
Version 22H2
I have tried uninstall / re install also disabling any virus protection / firewalls to the same outcome,
here is a video iv submitted of the issue also
if anyone has any ideas greatly appreciated
Cheers
I purchsed 9.5s software only and installed via steam used product key from the box
installed and opened and using the Spektrum W52000 + NX8 I can get the program started and fly (without setup) anything fixed wing
- When i attempt to setup my TX and select the simulation / select controller, nothing happens the menu just goes off
- if i try and select a helicopter of any sort i get the following error message
and the application automaticaly closes down after i send error report to knife edge software.
It gets better.. steam prompted me to download RF EVOLUTION so i done so and that is just a screen with the (i thinks its a Habu EDF)
once thats opened i cant do anything with menus or pressing esc dont overlay any menu nor does putting the curser to the right of the screen (although i do get the gong when i move the mouse to the LH side of the screen below is EVOLITION
so to recap
Spektrum NX8
Spektrum W52000
RF9.5s + EVO downloaded via steam and initiated with the serial key from the box from the model shop
my laptop is a new samsung book 2 pro 360 spec
Processor 12th Gen Intel(R) Core(TM) i7-1260P 2.10 GHz
Installed RAM 16.0 GB (15.6 GB usable)
System type 64-bit operating system, x64-based processor
Edition Windows 11 Home
Version 22H2
I have tried uninstall / re install also disabling any virus protection / firewalls to the same outcome,
here is a video iv submitted of the issue also
if anyone has any ideas greatly appreciated
Cheers