Taking the Clicker off the Throttle
Here's a step-by-step photo guide of how to take the racheting off of the throttle. It is so simple. Just open the back of the interlink (4 Screws), remove the throttle ratchet bracket, turn it upside down and re-reattach with screw. Replace the rear cover back and put the 4 screws back into place - go fly
#1: The RF6 Interlink Controller
#2: Throttle Ratchet Bracket
#3: Screw and Ratchet Bracket removed
#4: The back side of the Throttle stick
#5: The Throttle Ratchet Bracket re-installed upsidedown.