Someone who can make me a design of this goblin

Solo tengo esto por ahora
 

Attachments

  • IMG_20180915_232618.jpg
    IMG_20180915_232618.jpg
    465 KB · Views: 7
  • IMG_20181119_123019313_HDR.jpg
    IMG_20181119_123019313_HDR.jpg
    3 MB · Views: 11
  • IMG_20181201_181058201_HDR.jpg
    IMG_20181201_181058201_HDR.jpg
    1.6 MB · Views: 11
  • IMG_20181209_154118468_HDR.jpg
    IMG_20181209_154118468_HDR.jpg
    354.6 KB · Views: 11
  • IMG_20191116_150029998_HDR.jpg
    IMG_20191116_150029998_HDR.jpg
    3.5 MB · Views: 9
  • IMG_20181209_131159584_HDR.jpg
    IMG_20181209_131159584_HDR.jpg
    2.9 MB · Views: 9
  • IMG_20181209_124615131_HDR.jpg
    IMG_20181209_124615131_HDR.jpg
    1.9 MB · Views: 7
?
 

Attachments

  • IMG-20210903-WA0044.jpg
    IMG-20210903-WA0044.jpg
    342.9 KB · Views: 2
  • IMG-20210903-WA0043.jpg
    IMG-20210903-WA0043.jpg
    275.2 KB · Views: 2
  • IMG-20210903-WA0045.jpg
    IMG-20210903-WA0045.jpg
    334.3 KB · Views: 2
Well actually, none of those will really help. For the best results/ideally, what is really needed....is a close up picture, taken from straight on, NOT AT AN ANGLE.... AND of both sides, the same applies for the front. The picture you have in the first post will work very nice for the front left side, if you can also get a picture of the right side, that would be needed as well....Any chance you can get/take those pictures...???
 
The first very picture you posted (post #1) in this thread is good reference. THAT is what is needed, just get a picture like that of the right side, and then both sides of the tail boom.
 
[QUOTE = "tío twist, publicación: 345075, miembro: 58754"]
La primera imagen que publicaste (publicación n. ° 1) en este hilo es una buena referencia. ESO es lo que se necesita, solo obtenga una imagen como la del lado derecho, y luego ambos lados del brazo de cola.
[/CITA]
Mañana haré las fotos
 
ENVIOUSSLOTH, just wanted to remind you, not to use "flash" when you take the pictures, just natural sunlight light will do, what you want to avoid is any "glare" being on/in the picture.
 
Hola soy yo otra vez
 

Attachments

  • IMG_20210909_140145.jpg
    IMG_20210909_140145.jpg
    4.4 MB · Views: 8
  • IMG_20210909_140128.jpg
    IMG_20210909_140128.jpg
    4.4 MB · Views: 9
  • IMG_20210909_135848.jpg
    IMG_20210909_135848.jpg
    1.4 MB · Views: 10
  • IMG_20210909_135834.jpg
    IMG_20210909_135834.jpg
    4.5 MB · Views: 15
  • IMG_20210909_135822.jpg
    IMG_20210909_135822.jpg
    4.1 MB · Views: 14
  • IMG_20210909_135724.jpg
    IMG_20210909_135724.jpg
    1.3 MB · Views: 12
  • IMG_20210909_135706.jpg
    IMG_20210909_135706.jpg
    4.9 MB · Views: 10
  • IMG_20210909_135638.jpg
    IMG_20210909_135638.jpg
    1.1 MB · Views: 12
  • IMG_20210909_135615.jpg
    IMG_20210909_135615.jpg
    4.8 MB · Views: 10
Hola Envioussloth, those are some really good pictures, a little to much reflections in some, but I think I can work around that, give a week or two, and I`ll see what I can do......One more thing...what do you want to name it/call it...????
 
Last edited:
OK, So you want the name to be..... "Goblin CEMA 700"....Correct..????,....Just curious, what does "CEMA" stand for/or mean.....????
 
Back
Top