technoid
Well-known member
I forgot to map the inside of the wheel pants so I did that and then did the 1x1 mapping on the fuselage. I had to do a lot of work on the fuselage to get it right. The bottom needed a lot of adjustment and I had to remap the top of the fuselage. The top and bottom of the fuselage isn't the same length as the sides and I forgot to be careful enough when I mapped it the first time. But I just finished all that so I'm almost done. I also had to move a part when I remapped the top of the fuselage. So the only thing left to do is create a new mask for the color scheme.
EDIT: OPPs I did forget something I didn't 1x1 map the area behind the spinner. If you put a stripe down the side of the fuselage you need that area 1x1 mapped or the stripe won't align properly where it wraps around to that area. So not much but I do have something else to do.
EDIT: OPPs I did forget something I didn't 1x1 map the area behind the spinner. If you put a stripe down the side of the fuselage you need that area 1x1 mapped or the stripe won't align properly where it wraps around to that area. So not much but I do have something else to do.
Last edited: