Ah, so from what you're saying the calibration should be saved automatically ?Are you getting any pop-up messages from RF while starting it up?
This sounds like a Windows permission problem on the Documents\RealFlight Evolution folder.
flightengr knows in more depth than I do, but I have found sometimes you should run joy.cpl in Windows, and do a calibration there first. Then do a second from within RF. Windows may be retaining values that are too extreme for what RF expects.Ah, so from what you're saying the calibration should be saved automatically ?
No Pop-ups.
Maybe the calibration is being saved? The reason I don't believe the calib is being saved is that when I exit and reload, and then go into the calibration procedure, the settings seem all to cock ?? (All 100% with sticks centred)
I'll try flying a few models after a reload without recalibration to see if the calibration is actually lost and report back ;- )
I see that suggestion (calibrate in Windows) posted a lot here. I have never had to do that myself, but that doesn't mean it may not be worth doing.flightengr knows in more depth than I do, but I have found sometimes you should run joy.cpl in Windows, and do a calibration there first.
When starting blind, I just stir the sticks, knobs, sliders or switches until the ones displayed in Windows move....I see that suggestion (calibrate in Windows) posted a lot here. I have never had to do that myself, but that doesn't mean it may not be worth doing.
Because I keep seeing it, I started to try it once but Windows asks you to move things around based on an XBox gamepad (move the D-Pad buttons, then move the left stick, etc.) Since each RC controller maps its controls to Windows game controls differently, how do you know which control to move when Windows asks you to move a certain thing?
OK guys, it looks like my calibration was saved - I've flown a few models after restarting the app etc and all appears to be good.Ah, so from what you're saying the calibration should be saved automatically ?
No Pop-ups.
Maybe the calibration is being saved? The reason I don't believe the calib is being saved is that when I exit and reload, and then go into the calibration procedure, the settings seem all to cock ?? (All 100% with sticks centred)
I'll try flying a few models after a reload without recalibration to see if the calibration is actually lost and report back ;- )