SUPERSEDED ... NEWER LINK IS:
https://forums.realflight.com/index.php?resources/21692
FT Versa BN with landing gear TEST.
I mainly created this to test my versa Blunt nose build before maiden.
I had to add an arbitrary texture file to be able to export..sorry for that.
My main concern was the cg and landing gear angle ( attitude at ground) (currently +6 degrees)
feel free to redistribute the weights and test.
also I added left side thrust to help with taxiing, which causes nose dive when right roll.
thats all this is my very first attempt at creating realflight model.
Takeoff weight: 2 kg
motor: Turnigy Park480 Brushless Outrunner 1320kv
Prob: 9x4.7
cheers
Uploaded photos of actual gear attachement using velcro
except for the nose gear.
AS im using stabilization for my versa, I have added an AFS gyro to the model. Although I've set the gain to 1, it still flies some how stabilized. If you want totally unassisted control, then edit the plane in RF7.5 editor, go to electronics tab then for Left Aileron servo set input to receiver channel 2( ELE), Right Aileron servo...receiver channel 1( AIL), steering servo..receiver channel 4 (RUD).
https://forums.realflight.com/index.php?resources/21692
FT Versa BN with landing gear TEST.
I mainly created this to test my versa Blunt nose build before maiden.
I had to add an arbitrary texture file to be able to export..sorry for that.
My main concern was the cg and landing gear angle ( attitude at ground) (currently +6 degrees)
feel free to redistribute the weights and test.
also I added left side thrust to help with taxiing, which causes nose dive when right roll.
thats all this is my very first attempt at creating realflight model.
Takeoff weight: 2 kg
motor: Turnigy Park480 Brushless Outrunner 1320kv
Prob: 9x4.7
cheers
Uploaded photos of actual gear attachement using velcro
except for the nose gear.
AS im using stabilization for my versa, I have added an AFS gyro to the model. Although I've set the gain to 1, it still flies some how stabilized. If you want totally unassisted control, then edit the plane in RF7.5 editor, go to electronics tab then for Left Aileron servo set input to receiver channel 2( ELE), Right Aileron servo...receiver channel 1( AIL), steering servo..receiver channel 4 (RUD).
