40 lbs. 20 hp DA 200. 3D heaven. 3-pos switch selects mix mode. All the way down is standard 3D controls (no mixing). Centered gives you maximum aileron and elevator mixing (more aggressive for most maneuvers, but not for snaps and spins because ailavator mix makes it hard to stall the inside wing - use 3-pos switch down for these maneuvers). Up gives you reverse ailavator (both ailerons move in sync with elevator). If you’ve never used this, you’ll have to practice. Great for specialty tricks like 3 point taxi at 60 mph, faster high alpha, reduced drag in knife edge turns, smoother hover turns, and extremely steep approaches. If you use this mix on a physical 3D plane, recommend an instant release switch (like snap roll buttons, engine kill switch, or trigger switch). Since I programmed this for the interlink, I didn’t have that option. Be sure to also download the various 126 MaxMix color schemes shown in screenshots below. Watch Slick 126 at Joes_RC to see this AV in flight.

Thanks to thegibson for the truly excellent Slick 540_EA.

Find all 25th Century 3D AVs CSs and RCs by searching “-=-3D,” or all 25th Century files by searching "25cent."

25cent -=-fixed -=-3D -=-aerobatic -=-gas -=-20-40lb -=-10-20kg - -=-7-12' -=-2-4m =-100+mph -=-200+kph -=-15-7 -=-+