Align T-rex 700E PRO DFC build

[davehour]

Excellent model. Want to use it but...

I downloaded the file from the swap pages, imported it successfully and when I selected it under the list of custom aircraft, RF started to create the DDS file and then I got an unexpected error message, and the program closed. I then ran the program again, selected it again,, and "Invalid Data" errors started to appear one next to the other as I clicked the ok button. After all the error were acknowledged, I got a heli with a white canopy (blank), and only the head, main blades and tail blades had the proper look.

When I go to flying it, the heli appears with canopy disengaged from the frame aside it on the floor, and when I take off, I have the heli flying without the canopy, with a white frame with no details, and the canopy on the ground.

Any idea why this is happening?

I'm using RF6.5

Thanks,

David

I was able to import the file. I read the following tutorial post:

https://forums.realflight.com/showthread.php?t=28643

Followed the steps and still had problems. I then selected the Sod Farm photofield, and the problem was solved. I first didn't select Sod Farm because I was using a photofield, but it seems Sod Farm has the magic.

 

[davehour]

Hi all,

Well, I installed the MSH Ikon FBL Stabilization Unit in my T-rex 700E Pro DFC. I also moved the Castle ESC to the front tray. I like it there much better, and no overheating problems .

A picture of the original model is included too.

Special thanks to oneeyejack for making the changes. Thanks buddy!

 

[Muscleflex]

You guys are all too good!

Now if only someone manages to make the Speed 700 Fuse