fancy faom vantage

M

mx314

New member
heres the thread fo some one to make the vantage as there has been some interest in it.
 

Attachments

  • Vantage_001.jpg
    Vantage_001.jpg
    242.2 KB · Views: 18
  • Vantage_002.jpg
    Vantage_002.jpg
    4.3 KB · Views: 155
  • Vantage_003.jpg
    Vantage_003.jpg
    2.4 KB · Views: 155
  • Vantage_004.jpg
    Vantage_004.jpg
    3.7 KB · Views: 158
  • Vantage_005.jpg
    Vantage_005.jpg
    390.3 KB · Views: 14
If the designer needs any other pictures or flight model help, or whatever, I would be glad to take more pictures than what I took, and posted, which mx314 posted here.

Seth
 
Easy to fly
When its winter (where its cold) it gives us a way to fly an airplane and allows us to keep our thumbs nimble while staying warm.
If you crash, who gives a hoot, its $40 worth of foam.
If you crash, you can fix it a bazillion times before you have to get a new one
You can normally fix it at the field
Fun
 
how much more prisice they are. cheap, through it around alot. dont have to worry about flying survice vailures as much
 
3D-Seth said:
Easy to fly
When its winter (where its cold) it gives us a way to fly an airplane and allows us to keep our thumbs nimble while staying warm.
If you crash, who gives a hoot, its $40 worth of foam.
If you crash, you can fix it a bazillion times before you have to get a new one
You can normally fix it at the field
Fun
Click to expand...
That only applies to EPP foam though...
 
WingDude said:
No it doesn't, all you need is CA.
Click to expand...
Well sure.. But EPP takes a while to get to the point of breakage..

The foam on my e flite extra 260 is way to fragile to even be loaded into the car LOL, and it's a pain to carry it even in the slightest breeze...
 
you just have to be careful with them like any other airplane. They fix super easy too. Just a dab of CA and you're done. Or tape.
 
Mine was 4 oz even.

WS= 32"
Length= not sure, I will ask the designer

Battery I used: Thunder Power 350 mah 2 cell
Motor: Hacker A10 15S

I can help with anything you need, more pics, whatever just let me know!

Seth
 
3D-Seth said:
HaHa! I love gas airplanes....so much fun!
Click to expand...


ya me too, but he hasnt replied yet, and i found out some one spent more money out of my account :mad: so now i got to save up all over again
 
3D-Seth said:
Mine was 4 oz even.

WS= 32"
Length= not sure, I will ask the designer

Battery I used: Thunder Power 350 mah 2 cell
Motor: Hacker A10 15S

I can help with anything you need, more pics, whatever just let me know!

Seth
Click to expand...


servo weight? theres lighter motors out there like the axi? theres also lighter batts, ill look that up tonight


3dseth- look into this guys yak. from what people say its an extremly strong plane, flys with next to nothing for trimming. but its a kit. :eek:
 
Last edited:
You could go with a Thunder Power 2 cell 250 mah pack and lose a gram, and also lose a lot of flight time.

Theres not much lighter than the Hacker A10 15S. I currently have it on a design I have been working on, and its at 5.3 oz and it still pulls out with loads of authority.

Dymond D47s weigh 4.7g

JR 185 on ailerons 6g

RJ Gritter had one Vantage down to 3.85 oz RTF.

Seth
 
You must log in or register to reply here.
Back
Top