pricelessppp
New member
I would like to see the aircraft FT Nut ball FT Flyer and FT Delta in Realflight 7 so i could practice using it on my realflight 7 simulator when i am not flying.If possable can you make these in to planes that are not AV and i do not have any exspansion packs.
here are the plans for the three models.
http://assets.flitetest.com/article_files/FT-Flyer-Swappable-FULL-SIZE-PLANS_1360987085.pdf
http://assets.flitetest.com/article_files/-utball-wappable-_1359780412.pdf
http://assets.flitetest.com/article_files/FT-Delta-Swappable-FULL-SIZE-PLANS_1360345551.pdf
My equipment i got for the kits
HXT900 9g / 1.6kg / .12sec Micro Servo
GWS EP Propeller (RD-8043 203x109mm) black (6pcs/set)
Turnigy 500mAh 2S 20C Lipo Pack
TURNIGY Plush 18amp Speed Controller
OrangeRx R400 Spektrum/JR DSM2 Compatible 4Ch 2.4Ghz Receiver
Suppo 2208/14 1450kv Brushless Motor (Park 370 equiv.)
I would also like it to have realistic flight characteristics and if possible good graphics.
here are the plans for the three models.
http://assets.flitetest.com/article_files/FT-Flyer-Swappable-FULL-SIZE-PLANS_1360987085.pdf
http://assets.flitetest.com/article_files/-utball-wappable-_1359780412.pdf
http://assets.flitetest.com/article_files/FT-Delta-Swappable-FULL-SIZE-PLANS_1360345551.pdf
My equipment i got for the kits
HXT900 9g / 1.6kg / .12sec Micro Servo
GWS EP Propeller (RD-8043 203x109mm) black (6pcs/set)
Turnigy 500mAh 2S 20C Lipo Pack
TURNIGY Plush 18amp Speed Controller
OrangeRx R400 Spektrum/JR DSM2 Compatible 4Ch 2.4Ghz Receiver
Suppo 2208/14 1450kv Brushless Motor (Park 370 equiv.)
I would also like it to have realistic flight characteristics and if possible good graphics.