pplace
Well-known member
Sorry for the double post. I just wanted to make sure that anyone interested in this model would know it is now available for both G3.5 and G4.
I finally have both G3.5 and G4 versions ready to share!! Thanks for everyone who followed along on this long build thread. It was a fun project....and I know I'll keep working on it even after I have posted it here. I'm really happy with it.....but there's always room for improvement!
I will add the G3.5 version to the swaps as soon as I am done posting this information here. The G4 version is attached to this post
Attached are 5 of the most recent screen shots of it. Things that have changed since the last posted shots are: The h-stab and elevator, rudder have the C.S. applied to them. Along with several smaller items: gear doors, fuse step, spinner etc.
I did end up having to "manually" swap all the information from G4 to G3.5 I quickly double checked over everything to make sure it matched (it seemed to as far as I could tell) took it for a quick loop around the airfield in G3.5 and exported it. (I didn't test fly it as much as the G4 version but it seemed to fly very well....if anything the physics are a really good start to improve upon if wanted)
Please enjoy the model!!
Here is some information about the model if you haven't been following along with this thread:
Normal controls for throttle, aileron, rudder and elevator.
Additional controls are:
Rotary Knob: Flaps
Right Hand Toggle: Retracts
3 Pos. Switch: Canopy (middle is closed, back and forward are open)
Things to look for on model:
-Control stick in cockpit is controlled by both aileron and elevator inputs on the controller.
-Rudder pedals in cockpit are controlled by rudder input on controller.
-Canopy lever (wheel) in cockpit rotates while canopy is in motion (3 Pos. Switch)
-Cowl vents (3 per side) open and close with throttle inputs
3D Model: pplace
Flight Physics: pplace
Color Scheme: pplace
I finally have both G3.5 and G4 versions ready to share!! Thanks for everyone who followed along on this long build thread. It was a fun project....and I know I'll keep working on it even after I have posted it here. I'm really happy with it.....but there's always room for improvement!
I will add the G3.5 version to the swaps as soon as I am done posting this information here. The G4 version is attached to this post
Attached are 5 of the most recent screen shots of it. Things that have changed since the last posted shots are: The h-stab and elevator, rudder have the C.S. applied to them. Along with several smaller items: gear doors, fuse step, spinner etc.
I did end up having to "manually" swap all the information from G4 to G3.5 I quickly double checked over everything to make sure it matched (it seemed to as far as I could tell) took it for a quick loop around the airfield in G3.5 and exported it. (I didn't test fly it as much as the G4 version but it seemed to fly very well....if anything the physics are a really good start to improve upon if wanted)
Please enjoy the model!!
Here is some information about the model if you haven't been following along with this thread:
Normal controls for throttle, aileron, rudder and elevator.
Additional controls are:
Rotary Knob: Flaps
Right Hand Toggle: Retracts
3 Pos. Switch: Canopy (middle is closed, back and forward are open)
Things to look for on model:
-Control stick in cockpit is controlled by both aileron and elevator inputs on the controller.
-Rudder pedals in cockpit are controlled by rudder input on controller.
-Canopy lever (wheel) in cockpit rotates while canopy is in motion (3 Pos. Switch)
-Cowl vents (3 per side) open and close with throttle inputs
3D Model: pplace
Flight Physics: pplace
Color Scheme: pplace
Attachments
Last edited: