Heli setup with RF9 and Taranis

[Ramnes]

I´m trying to set up my Taranis for helicopter on the RF9 and using radio mixing, it spins up but will not lift off and I have no idea of how to set up mixing in RF9 and have been looking for a dummies way to do it with no luck. Can someone point me in the right direction?

 

[Boof69]

Setup a special profile for Realflight and in the radio settings go to all of the channels, (Throttle,Aileron,Elevator, and Rudder), individually and set there "weight" and "Offset" to [50]. That will effectively half the input resolution but that's just the way it will have to work for realflight.

 

[Ramnes]

This is what I did to get it to work. Do whats explained here:https://forums.realflight.com/index.php?threads/controller-setup.50485/page-2#post-326050

Then assign all surfaces to the right surface in RF, also ch5-10.
Then when throtteling up and it wont lift off the ground use RS to increase/decrease pitch to fly. Remember to calibrate in Taranis and in RF.

Go fly