Installation Issue from pendrive

[Andre Medeiros]

The cd/dvd-rom driver on my computer is presenting bad function. Then I do a copy of RF8 dvd-rom to a USB pendrive through another computer.
I start the instalation from USB pendrive renamed RFV8, but after confirm instalation the installer requires insert disk #1 labelled RFV8_1 in cd drive. However there is only one dvd installation disk, why the installer is requiring a specific disk. It looks like old installion cd rom pationated in several disks?

Is it possible copy RF8 dvd rom installer to USB pendriver and install RF8 from pendrive?


Thank you for help support

 

[adrenoline 60]

This was taken from Sticky: Frequently Asked Questions - RF7
Q. MY COMPUTER DOES NOT HAVE A CD/DVD DISK DRIVE, HOW DO I INSTALL/
A. See the following thread which explains, using a USB drive for installing the RF software.
https://forums.realflight.com/showthread.php?t=31152

If your new to RealFlight I suggest you take a look at
Sticky: Frequently Asked Questions - RF7

Its like the RealFlight cheat sheet. Its Loaded with important information, all in one spot. It can answer questions you haven't even thought to ask yet.
Since RealFlight 8, is based on RealFlight 7, its all good.

The Full Manual is available, In the Main Menu. "Help"

 

[Andre Medeiros]

Thank you

I have done a mistake. The correct name of DVD is RFV8_1. I had renamed incorrectly to RFV8
Installation Works from USB pendrive.