Request Aircraft here

The Mentor has already been done.

An existing Corsair can be easily modified. Search the swaps, you'll likely find an AV for an existing Corsair to make it fly like the plane you want.
 
doug schluter said:
Well crashed i could try to do it justice don't know if i can still learning this stuff.I would like to try it though.Thanks
Click to expand...
Doug,
This represents one hour design time, and as far as i am willing to take this project without commitment from a FLOAT FLYER (i am not, yet.....) willing to do the physics.
As for color, you will only need to paint inside the lines, i make maps that look like a coloring book.
P.M. me and let me know.
Ben
 

Attachments

  • norsman1.jpg
    norsman1.jpg
    135 KB · Views: 27
i would like some one make a rc glastar
to get a good look at it here is some pictures and specifications


Specification
Scale 1:5
Wing Span 84" (2134mm)
Fuselage Length 47.5"
Flying Weight 8 - 9 lbs
Recommended Engines .60 2 Cycle or .80 4 Cycle, Electric
Recommended Radio 5 Channel, 7 servos
Wing Balsa planked over EPS foam
Selected model Airfoil GA35A315
Full Scale Airfoil GA35A315
Wing Loading (Gross) 25 oz/ft2
Flap Construction Solid balsa
Dihedral angle Per Print
Angle of incidence Per Print
Fuselage Molded fiberglass, white gelcoat
Cockpit visible Yes
Windscreen & windows Vacuum formed
Landing gear Formed Aluminum
Wheel Pants with fairings Fiberglass, white gelcoat


Included components
Engine mount Glass Filled Nylon - Supplied
Wheels Mains 3” dia. Nose 2 1/2”dia
Servo mounts Laser cut plywood
Fuel tank and fuel line 300cc Supplied
Bellcranks & horns Supplied
Pushrods & ends Supplied
Packing Double wall corrugated

thnks
Attached Thumbnails
 

Attachments

  • _wsb_320x192_CIMG2865.jpg
    _wsb_320x192_CIMG2865.jpg
    31.8 KB · Views: 8
  • _wsb_320x196_CIMG2872.jpg
    _wsb_320x196_CIMG2872.jpg
    31.8 KB · Views: 3
  • _wsb_320x240_CIMG2814.jpg
    _wsb_320x240_CIMG2814.jpg
    31.8 KB · Views: 11
  • _wsb_320x240_CIMG2869.jpg
    _wsb_320x240_CIMG2869.jpg
    31.8 KB · Views: 9
  • _wsb_320x240_IMAG0026.jpg
    _wsb_320x240_IMAG0026.jpg
    31.8 KB · Views: 5
crashed again said:
Doug,
This represents one hour design time, and as far as i am willing to take this project without commitment from a FLOAT FLYER (i am not, yet.....) willing to do the physics.
As for color, you will only need to paint inside the lines, i make maps that look like a coloring book.
P.M. me and let me know.
Ben
Click to expand...
Man that is quick Ben,and looks good, i'll try and help where i can.Thanks Doug
 
doug schluter said:
Man that is quick Ben,and looks good, i'll try and help where i can.Thanks Doug
Click to expand...
Not quick, but not bad.
Check this out...

and how big should this plane be?
crashed
 
Last edited:
crashed again said:
Not quick, but not bad.
Check this out...

and how big should this plane be?
crashed
Click to expand...
Well i'm thinking about 96in or 105 some place in that size ,I helped my Brother inlaw to setup his 96in Beaver on floats and it flew and looked just like the real beaver so that would be a good size .I can't seem to play the Norseman flight vid guess i don't have the correct player for it.
 
Hour 2

Here is the progress for the seccond hour.
should have basic flight version tomorrow.
enjoy
crashed
EDIT:
Basic flight physics...Still much work left to do.
enjoy
crashed
 

Attachments

  • ScreenShot1218664662.jpg
    ScreenShot1218664662.jpg
    405.8 KB · Views: 24
Last edited:
crashed again said:
Here is the progress for the seccond hour.
should have basic flight version tomorrow.
enjoy
crashed
Click to expand...
I'm impressed at how you can crank this out looking very good i don't know if i would have the patients to learn 3D modeling,like i say if i can help out i'll try, heres the AV i've been working on i added flaps did some changes weight ect.to fly some what like the 96in Unionville beaver i setup and flew for my brother inlaw it had flaps so i put those in just to test, anyway see what you think of it,not perfect but not bad. thanks Doug
 
Last edited:
Edited base aircraft

This incorperates the edit's Doug made, along with "physical" flaps, and some basic "color" applied. Alittle work to pretty up the wingtips...
enjoy
crashed
 
Last edited:
crashed again said:
This incorperates the edit's Doug made, along with "physical" flaps, and some basic "color" applied. Alittle work to pretty up the wingtips...
enjoy
crashed
Click to expand...
Starting to shape up very nice, heres the AV with a few more tweaks and the OS FR5-300 radial getting real close now i think, just like the Beaver it balloons just a bit at full throttle and drops a wing at the end of its flight envelope have a try 2 AVs see which one is better.thanks I think the 2nd one is better mind you most of my planes are almost tail heavy as this is but very controlable even the struts whistle like the Beavers does . Doug
 
Last edited:
Focke-Wulf Triebflügel

Someone want to make a Focke-Wulf Triebflügel Do you guys think the sim could even handle a flight model as crazy as this one? i'd give it a try myself but would be bummed if it didn't work in the sim :(
 

Attachments

  • 3bftrieb.jpg
    3bftrieb.jpg
    6.4 KB · Views: 16
Last edited:
Can someone please make QQ's Europhia?
 

Attachments

  • 200706290600157.jpg
    200706290600157.jpg
    95.2 KB · Views: 10
  • 200706290601007.jpg
    200706290601007.jpg
    53.8 KB · Views: 10
  • 200706290601285.jpg
    200706290601285.jpg
    54.7 KB · Views: 12
  • 200706290601414.jpg
    200706290601414.jpg
    5.4 KB · Views: 223
Caution "wet Paint"

doug schluter said:
Starting to shape up very nice, heres the AV with a few more tweaks and the OS FR5-300 radial getting real close now i think, just like the Beaver it balloons just a bit at full throttle and drops a wing at the end of its flight envelope have a try 2 AVs see which one is better.thanks I think the 2nd one is better mind you most of my planes are almost tail heavy as this is but very controlable even the struts whistle like the Beavers does . Doug
Click to expand...
So it looks like i just need to add some material values to the parts, to give them the correct "shine". Hope ya like it.
enjoy
crashed
EDIT
Awaiting approval of the float expert, it will be on the swaps as soon as possible.
And decided yellow better suited this one...
AND it comes in under 8k poly's (7792) so no ~CS_COLL !!!!
Down side to that is no interior either... good trade for simplicity i think.
 

Attachments

  • ScreenShot1218826020.jpg
    ScreenShot1218826020.jpg
    250.7 KB · Views: 23
  • ScreenShot1218828622.jpg
    ScreenShot1218828622.jpg
    165.1 KB · Views: 17
Last edited:
reference dimension?

3-DMan said:
Can someone please make QQ's Europhia?
Click to expand...
Great 3-view pix. I might recommend at least one (1) reference dimension so the designers have something to scale the pix with. Hope someone takes this job on.
 
Requesting Models for G3.5

A-12 or Sr-71 second seat hump and D-21 on its back
XB-70 (Valkyrie)
E-3 (Sentry)
X-29 (NASA)
King Air B200
CH-3 (Jolly Green)
Lear Jet
Kamov Ka-25 (Hormone)
Lun Ekranoplan weird Bird would be nice to see Very Hard for any one to design
Tupolev Tu-142 (Bear)
Antonov An-124 Russlan (Condor)
Antonov An-225 Mriya (Cossack)

I guess if Im going to Post...I might as well just Post ...lol
I guess these are to hard to design for G3.5 but...
If you decide to Make...Good Luck...
 
You must log in or register to reply here.
Back
Top