Hello all.
I'm fairly new to the RC hobby, and practically brand new to RF so please forgive me if I miss anything I'm supposed to include when making a model request. I know there's a CTSW on the pages, but I've always thought the Flight Design CTLS is a beautiful plane and hope someone else thinks so as well and will be inclined to make a version of the Freewing model.
Please let me know if there's anything else I need to include here and I'll look around and see if I can find it.
Thanks!
Airplane Specs-
Wing Span: 28 Feet, 2 Inches
Length: 21 Feet, 8 Inches
Height: 7 Feet, 8 Inches
Cabin Width: 49
Aspect Ratio: 7.29:1
Empty Weight: 790/ 810Pounds
Gross Weight: 1,320 Pounds
Fuel Capacity: 34/35 Gallons
Fuel Economy: 5.5/4.3 Gallons/Hour
Powerplant: Rotax 912S or 912iS (100HP) 2000 TBO
Speed: 120 KTS
Economy Range: @4300RPM 830 NM /1055 NM
A 3 View of the plane:
Model Specs-
Wingspan: 1200mm/47.25in
Length: 900mm/35.4in
Flying Weight: 1100g
Power System: Brushless 3510-1000Kv
Speed Control: 30A, Internal BEC, T connector
Propeller / EDF: 9x8 3 blade prop
Servos: 9g×5
Landing Gear: Fixed
Required Battery: 11.1V 1800mAh 25C 3 cell LiPo
Required Radio: 4 Channel
Rudder: Yes
Flaps: Optional -molded servo area and flap cut outs
Ailerons: Yes
Lights: No
Hinge Type: Nylon hinges on all control surfaces
Material: EPO Foam
And a few pictures of the Model. I couldn't find any "3 view" images unfortunately.