RF Evolution new Menu

malmaz

malmaz

New member
On my new download RF evolution when I press the ESC button on my keyboard to show the new menu a error message pops up asking if I want to report it,
yes or no, pressing either button then closes RF down, any help would be grateful, I have enclosed details of my desktop below.

Computer Information:
Manufacturer: System manufacturer
Model: System Product Name
Form Factor: Desktop
No Touch Input Detected

Processor Information:
CPU Vendor: AuthenticAMD
CPU Brand: AMD Phenom(tm) 9950 Quad-Core Processor
CPU Family: 0x10
CPU Model: 0x2
CPU Stepping: 0x3
CPU Type: 0x0
Speed: 2606 Mhz
4 logical processors
4 physical processors
HyperThreading: Unsupported
FCMOV: Supported
SSE2: Supported
SSE3: Supported
SSSE3: Unsupported
SSE4a: Supported
SSE41: Unsupported
SSE42: Unsupported
AES: Unsupported
AVX: Unsupported
AVX2: Unsupported
AVX512F: Unsupported
AVX512PF: Unsupported
AVX512ER: Unsupported
AVX512CD: Unsupported
AVX512VNNI: Unsupported
SHA: Unsupported
CMPXCHG16B: Supported
LAHF/SAHF: Supported
PrefetchW: Unsupported

Operating System Version:
Windows 10 (64 bit)
NTFS: Supported
Crypto Provider Codes: Supported 311 0x0 0x0 0x0

Video Card:
Driver: Radeon RX550/550 Series
DirectX Driver Name: aticfx32.dll
Driver Version: 30.0.13023.4001
DirectX Driver Version: 30.0.13023.4001
Driver Date: 12 16 2021
OpenGL Version: 4.6
Desktop Color Depth: 32 bits per pixel
Monitor Refresh Rate: 59 Hz
DirectX Card: Radeon RX550/550 Series
VendorID: 0x1002
DeviceID: 0x699f
Revision: 0xc7
Number of Monitors: 1
Number of Logical Video Cards: 1
No SLI or Crossfire Detected
Primary Display Resolution: 1920 x 1080
Desktop Resolution: 1920 x 1080
Primary Display Size: 20.47" x 11.42" (23.43" diag)
52.0cm x 29.0cm (59.5cm diag)
Primary Bus Type Not Detected
Primary VRAM Not Detected
Supported MSAA Modes: 2x 4x 8x

Sound card:
Audio device: Speakers (VIA HD Audio)

Memory:
RAM: 8191 MB

VR Hardware:
VR Headset: None detected

Miscellaneous:
UI Language: English
Media Type: DVD
Total Hard Disk Space Available: 1842328 MB
Largest Free Hard Disk Block: 948581 MB
OS Install Date: Mar 02 2021
Game Controller: InterLink detected
MAC Address hash: c68d54ce716fbf5d513854df01fcaad32cfabe01

Storage:
Disk serial number hash: 49631a1b
Number of SSDs: 0
Number of HDDs: 0
 
It is a problem with your video card driver. Radeon distributed ones that were incompatible with Windows DX9 that RF uses. They have apparently fixed that for some of their models. Do a bit of searching here to see if yours has been fixed.
 
Hi Flapper
Thanks for the info, I have updated the drivers on my computer as advised in your last link but it still closes evolution when i press ESC to to access the new menu. every thing else is working ok on evolution and RF 9.5 apart from this problem.
 
new details for my desktop:
Computer Information:
Manufacturer: System manufacturer
Model: System Product Name
Form Factor: Desktop
No Touch Input Detected

Processor Information:
CPU Vendor: AuthenticAMD
CPU Brand: AMD Phenom(tm) 9950 Quad-Core Processor
CPU Family: 0x10
CPU Model: 0x2
CPU Stepping: 0x3
CPU Type: 0x0
Speed: 2606 Mhz
4 logical processors
4 physical processors
HyperThreading: Unsupported
FCMOV: Supported
SSE2: Supported
SSE3: Supported
SSSE3: Unsupported
SSE4a: Supported
SSE41: Unsupported
SSE42: Unsupported
AES: Unsupported
AVX: Unsupported
AVX2: Unsupported
AVX512F: Unsupported
AVX512PF: Unsupported
AVX512ER: Unsupported
AVX512CD: Unsupported
AVX512VNNI: Unsupported
SHA: Unsupported
CMPXCHG16B: Supported
LAHF/SAHF: Supported
PrefetchW: Unsupported

Operating System Version:
Windows 10 (64 bit)
NTFS: Supported
Crypto Provider Codes: Supported 311 0x0 0x0 0x0

Video Card:
Driver: Radeon RX550/550 Series
DirectX Driver Name: aticfx32.dll
Driver Version: 31.0.12029.10015
DirectX Driver Version: 31.0.12029.10015
Driver Date: 11 30 2022
OpenGL Version: 4.6
Desktop Color Depth: 32 bits per pixel
Monitor Refresh Rate: 59 Hz
DirectX Card: Radeon RX550/550 Series
VendorID: 0x1002
DeviceID: 0x699f
Revision: 0xc7
Number of Monitors: 1
Number of Logical Video Cards: 1
No SLI or Crossfire Detected
Primary Display Resolution: 1920 x 1080
Desktop Resolution: 1920 x 1080
Primary Display Size: 20.47" x 11.42" (23.43" diag)
52.0cm x 29.0cm (59.5cm diag)
Primary Bus Type Not Detected
Primary VRAM Not Detected
Supported MSAA Modes: 2x 4x 8x

Sound card:
Audio device: Speakers (VIA HD Audio)

Memory:
RAM: 8191 MB

VR Hardware:
VR Headset: None detected

Miscellaneous:
UI Language: English
Media Type: DVD
Total Hard Disk Space Available: 1842328 MB
Largest Free Hard Disk Block: 948581 MB
OS Install Date: Mar 02 2021
Game Controller: InterLink detected
MAC Address hash: c68d54ce716fbf5d513854df01fcaad32cfabe01

Storage:
Disk serial number hash: 49631a1b
Number of SSDs: 0
Number of HDDs: 0
 
What controller are you using.? Interlink, Interlink DX?, If it is the DX then try connecting it with a USB Hub.
 
malmaz said:
I am using the older Interlink Plus controller
Click to expand...
It might be an issue with that controller and compatibility. I would use the mouse instead and move it to the left of the screen until the selection menu slides out and then pick the options you want. Also I would enable the legacy menus found in all other versions of RF for ease of use and forget the new menu system entirely like Others and I have already done. Press the ~ key when you are in RF to get the console, and type showlegacymenu exactly like I posted, and then press enter. It will now be like any other version of RF at this point where you can use the menu at the top and menu at the side to select what you want to do.
 
Thanks for that csgill75, Yes I have done that and got the legacy menu showing now plus the menu to the left, I have updated my display drivers, uninstalled and re installed RF evolution and still can not get the new menu up when I press the ESC button it just comes up with a error message and when I click on the send info to the makers button, it shuts evolution down. Apart from that my controller is working ok with RF9.5s and evolution so I will just do as you say and stick with the legacy menu and the one at the left side. The only problem I have now is when I am on Evolution I have a message telling me to ( press the ESC button on my keyboard or the cancel button on my controller ) and I Don't know how to get rid of it. I think I will just stick with RF 9.5s instead.
Thanks again for the info.
 
Yeah, I started to get the "how to" menu prompt all the time too, even though I only use the legacy menu. Another to-do - see if there is a way to disable it.
 
Yes, you can disable that just like you can bring back the legacy menu bar.

Open the command console with ` or ~, and then enter "showmenunotification"

That will toggle the on/off state of the notification each time you do it. So if you just do it once, it will change to off and stay that way.
 
Thank you! Nice that was an option.
That is almost as great as "kablooey" or "showmethemoney"
(The first makes your plane go up in flames when you crash. The second tells you how much repairs cost when you reset after a crash)
 
flightengr said:
Yes, you can disable that just like you can bring back the legacy menu bar.

Open the command console with ` or ~, and then enter "showmenunotification"

That will toggle the on/off state of the notification each time you do it. So if you just do it once, it will change to off and stay that way.
Click to expand...
Thank you, cleared that message ok.
 
You must log in or register to reply here.
Back
Top