This is a made by request RF8 model of the Flite Test Bloody Baron.
It is a pretty easy flyer.
All servo and push rod animation settings are set to match the control throws.
Those settings will need to be adjusted to match the animation for any control throw changes.
Notes:
1. I prefer to fly on 4S packs and so the CS and physics are set for that size battery.
2 With the 8x6 prop, the FTBB maxs out at about 60 mph in level flight.
An 8x8 is highly recommended to bump up the speed.
3. With the flat bottom air foiled wing, some down thrust is needed-- adjust for personal taste.
4. The rudder authority is rather weak. Perhaps there is a physics change to improve that. I have seen that some choose to build their FTBB with one piece fins.
AVs of this model are welcome with physics adjusted closer to the real world for those who have personal flying experience with the FTBB.
It is a pretty easy flyer.
All servo and push rod animation settings are set to match the control throws.
Those settings will need to be adjusted to match the animation for any control throw changes.
Notes:
1. I prefer to fly on 4S packs and so the CS and physics are set for that size battery.
2 With the 8x6 prop, the FTBB maxs out at about 60 mph in level flight.
An 8x8 is highly recommended to bump up the speed.
3. With the flat bottom air foiled wing, some down thrust is needed-- adjust for personal taste.
4. The rudder authority is rather weak. Perhaps there is a physics change to improve that. I have seen that some choose to build their FTBB with one piece fins.
AVs of this model are welcome with physics adjusted closer to the real world for those who have personal flying experience with the FTBB.
