I'm trying to fly the 6CH Blade 150s Heli on RF Evolution (with the WS2000 and a DX6e - with which I have flown more than a few simple planes without trouble). After struggling to program the 150s into my TX, I attempted a flight only to discover the blades would not turn unless I was in flight mode 2 - and then it shot towards the sky. I ran the controller calibration tool in RF and discovered that the blades now turn in mode 1. Well, at least now I know my transmitter just may be programmed correctly.
With the throttle and pitch curves, and rates and expos in play, I'm thinking calibration might be complex?
So, my question is, what switches do I flip while I'm moving the sticks during RF calibration? In what combination? In my TX, I've configured flight modes N/1/2 on SW-B, and Rates 0/1/2 on SW-G, Hold on SW-H, and Panic Mix on SW-I (Bind).
If the DX6e can't handle this 6CH sim, what settings do I drop, and where?
Also, I would love to create a keyboard hotkey for resetting a crashed airframe. Can someone post a link to a how to, or else include it here?
Thank you! - Tony.