Thanks guy
The map has the added benefit of being almost complete symmetrical between parts having both a right and left side. This was caused by mapping only one half of the model and then mirroring it and separating the two half's. I tried really hard to place the mirrored side and the other side on the same X axis. This will allow a Re-Painter to easily paint one part on one side then Select, Copy, Paste, Flip, Move where it is needed, and Stamp.
I did over stamp a few parts on the map like the back side of the vertical stab. None of the pictures I looked at had any writing on the back side. The top of the engines and the bottom of the engines are over stamped too. Any one doing a camo paint job will still be able to do one providing they allow for both tops to look the same. The two outboard sides of the engines cowls are each separate so different base logos with text can be attached. I came up with the ideal of just painting the gun barrel cover rather then modeling all the cooling holes. This will have a nice effect in G3 and hopefully even better with a Bump map for G 4 and G5 users.
I plan on doing the 188th Fighter Wing, located in Ft. Smith, Arkansas. This is the home to the 184th Fighter Squadron flying the A-10 " THE FLYING RAZORBACKS " Go Hogs!!!
I will upload a plane gray and a desert tan paint job allonge with a blank map to the Net somewhere for other to have a try at paintin.