Parts Repository ONLY

[Junkboy999]

This is the Magnum XL 70 I used on my Blue Max. To save poly's I UV mapped the cylinder head and did not make cooling fins. The engine cylinder head has been mapped, and a small tga file Is places here.

This FILE is zipped up and is in 3ds and Wings 3d format, The Texture is a TGA file.

My files are placed in here for other modelers to use for their Real flight Projects only. Do not upload my work to other 3D Graphics sights.

 

[Junkboy999]

When I started to model some one gave me a sample plane. I'm the type that I likes to see and play with something first to see how it was made. Here is a simple tail dragger 3d Model to play with. If you get if flying in RF ( it still need work ) please do not up load it, Unless you changed it so much I can't tell. I'd hate to see 16 people learning how to model import 16 versions of the same model to the swap page

PLANE1 is a zipped up WINGS3D format 3d Model
PLANE2 is a zipped up .3DS file format
You'll have unzip them before use.

My files are placed in here for other modelers to use for their Real flight Projects only. Do not upload my work to other 3D Graphics sights.

 

[pplace]

Here is the HP VT-.21 Engine I modeled for the Top Flite Elder.

The only item I removed in the actual G4.5 file is the "knurl" on the high end needle adjustment.

 

[brentg]

Aim9_h Missile

Aim9-h missile....3ds..file is mapped with included tga, plus there is a side view background with all Aim9 models.

 

[dhk79]

Basic Floats

I posted this on another thread (specifically for a user) and felt it only right that I add it here for everyone to find.

A basic set of floats that I originally used on the Super Decathlon.

Doug

 

[flexible]

Big Bird Servo

This is the big bird servo and linkage I made for the ROOKIE

 

[flexible]

This is the wheel I made for JAYJAY

 

[DirtyHarry3033]

Do-335 Landing Gear

As requested by willsonman, here is the landing gear from my Do-335 in .3ds format.

DH

 

[flexible]

JOJOs heat!

 

[willsonman]

Robart Robostruts

Robart Robostruts. Two different types. Used with few polygons. Both are included in 3ds format in archive.

 

[inky00]

MVVS 58 Prosport

For anyone that wants an engine for there model,here is my MVVS 58 Prosport model.It stands at 8168 Tri's.It is available in 3ds and max format,which are both in the Zip file.

 

[fender1]

Rubber band to hold the planes wings to the fuselage. .3ds file

 

[dhk79]

Mechanical Retracts

Adhering to my own self-imposed principle of borrow a part, leave a part; here's a scale mechanical retract I just designed in payment for an engine I just used.

 

[mwilson914]

Since I think control sticks are no fun to model I decided to upload the one I created for the SAAB Gripen. I tried to make it as accurate as possible and it can be even more detailed with good UV mapping and even extra modeling for those into that sort of thing.

Just remove the .zip extension and it's ready to import as a .3ds.

 

[mwilson914]

Here is a basic AR6400 BRICK which I made for the Ultra Micro 4-Site.

remove the .rfx from the file name to import the .3ds

 

[mrfourtyseven]

detailed hitec servo

hitec servo

 

[spot242]

hello all

Ive made this model and don't know what to do next so if someone would like to take over and complete it it would be awesome. All Ive done is basically made the 3D model (I used wings 3D.)
Hope someone takes this up as its a great model to fly in real life.

To open this just remove the .rfx and the end of the name.

 

[flexible]

Took off the excess hardware and polies

 

[fender1]

6CH receiver with flat area for logos 1 one is .3ds file type secound one is .wings file type

 

[fender1]

Futaba servo and linkage .3ds file type second one is .wings file type