Request Aircraft Here!

The pics on the links are just as good as anything I can upload.

The unique thing about this plane is all the control is done by the motors.
I believe they are a 180 size brushed motor.

It has no moving control surfaces.
The rudder is done by changing the power to one motor.
The elevator is controlled by the throttles.

I have never been able to get this plane upside down in a roll or a loop.
You can hand launch or it will do a rolling take-off.
Easy to do a hand-catch landing.
 
OV-1b Mohawk and Piper Cub J3

How about some one comeing up with a OV-1B Mohawk and a Piper Cub J3 for G3.5. I worked on the Mohawk in the service
 
Sweet82 said:
I have a Harbor Freight Yellow Bee.
Believe it or not, it actually flys?
It's hard to beat for $29.99 complete with radio.

It's small enough to take on trips and I enjoy flying it.

I'd love to see a G3.5 version of it.

I'm not sure what you need to make one but here are the specs from the manual.

Technical Specifications
Overall Dimensions: 23” L x 31-1/4” W x 5” H (Tail/Wing Tips)
Flight Time: Approximately 20 minutes
Flight Range: 1, 640 Feet
Wing Dimensions: Front = 31-1/4” span x 4” Wide
Tail Wing: 12” Span x 2-1/4” Wide
Fuselage Dimensions: 8-1/8” L x 1-1/2” W x 2-1/4” H
Landing Gear: 2-1/2” H x 4-1/4” W
Wheels: 3/4” diameter x 1/8” Wide
Propellers: 4” L x 1/2” W (30 degree pitch);
Pusher type with 7/16” L x 7/16” diameter Nose Cone.
Power Supply: Airplane- 4 cell 4.8V Ni-Mh rechargeable batteries
Weight: 1.7 Lbs.
The “V” shaped elevator acts as both rudder and elevator.

Links,
http://www.harborfreightusa.com/usa...o?itemid=92304&CategoryName=&SubCategoryName=
http://www.harborfreight.com/manuals/92000-92999/92304.pdf

It's a great little plane.
Click to expand...

Since I know what pictures a modeller needs to model a plane for RF, I'll see what I can do about getting the appropriate pictures of this plane. I can't under any circumstances take on the modelling of it because my plate is full with planes I started before my daughter came along, but I'll get the pics if someone else would want to do it. I bought one of these things a couple years ago just cause I had 30 bucks in my pocket
 
Great Planes Matt Chapman Eagle 580

Specs:
Wingspan: 100 in (2540 mm)
Wing Area: 1892 in² (122.3 dm²)
Weight: 24-28 lb (10.88-12.70 kg)
Wing Loading: 29-34 oz/ft² (88-104 g/dm²)
Length: 96 in (2440 mm)
Requires: 6+ channel radio w/10 servos & 85-100 cc gasoline engine
 

Attachments

  • gpma1286-4view-lg.jpg
    gpma1286-4view-lg.jpg
    68.9 KB · Views: 15
Parkzone T-28

Another vote for the Parkzone T-28, if anyone is inclined to do it. I lost mine when I upgraded to 4.5. And thank you to all you designers from one computer-challenged flyer.
 
Pics.

Cowboy said:
Since I know what pictures a modeller needs to model a plane for RF, I'll see what I can do about getting the appropriate pictures of this plane. I can't under any circumstances take on the modelling of it because my plate is full with planes I started before my daughter came along, but I'll get the pics if someone else would want to do it. I bought one of these things a couple years ago just cause I had 30 bucks in my pocket
Click to expand...


Here is some crappy photos of the Yellow Bee!
I hope this helps

Thanks,
 

Attachments

  • PICT0004a.jpg
    PICT0004a.jpg
    454.8 KB · Views: 10
  • PICT0011a.jpg
    PICT0011a.jpg
    384.5 KB · Views: 8
  • PICT0010a.jpg
    PICT0010a.jpg
    322.8 KB · Views: 8
  • PICT0006a.jpg
    PICT0006a.jpg
    449.7 KB · Views: 7
  • PICT0008a.jpg
    PICT0008a.jpg
    380.7 KB · Views: 7
Can you make a Kyosho Flip 3D

KYO-11141FB-lg.jpg
 
Hirobo sedua evolution 50

Hi all.Hey I was just wondering,I see a lot of helis on here but no Hirobos,could someone put a Hirobo sedua evolution 30/50 heli on here for learning to fly on?thanks Billy
 
A sim or sims I would like to see for g3.5

Mainly, the planes I have, but have not seen a sim for.

Kyosho Spree Sport
Multiplex EZ Pro Electric Glider
ElectriFly Edge 540 EP XLC
Hanger 9 Frenzy 100 ARF
G.Planes SLO POKE 40
 
Roll Tide!

I just purchased the Real Flight G 3.5 . If anyone could recreate the e-flites blade cx-3 for the simulator i'd really appreciate it. Also concerning the color schemes does anyone have a alabama crimson tide color scheme or a houndstooth. Their has been one created for g4.5 but not g3.5.
 
You must log in or register to reply here.
Back
Top